Attached to the back wall of the scanner, the two magnetic
document return guides send the scanned document back
over the top of the scanner to make feeding the next
document a more ergonomic process for the operator. The
guides are adjustable for optimal placement based on the
width of the batch of documents being scanned, further
increasing production speed.
The paper guide consists of only one piece - including the
scanning bed, the scanning area and the exit part. There are
no edges or catches which could cause a paper jam. If
necessary, the entire paper guide can be removed by
unscrewing a few easily accessible screws, allowing full
access to the transport drums and the background drums.
Antistatic stainless steel paper guide
Textured surface for trouble free transport
Extremely long lasting
The WideTEK 36C uses three very fast, dual light CIS
elements that illuminate the scanning surface almost
perfectly, making all surface imperfections invisible
Three CIS modules with 300+ LEDs each
Dual row illumination hides all wrinkles
Much faster than most CCD scanners
This type of transport system can only be found in more
expensive CCD based scanners. Image Access is the first
vendor to design a production ready transport system into a
low cost CIS scanner
Four wheel drive
Gentle transport with minimal pressure
Easy to clean gray rubber on both side
Two USB connectors at the front of the device make it easy
to walk up to the scanner, plug in a USB storage device, scan
your source document and walk away - without the need
for a connected PC - key to any self-service environment.
Two robust, industrial quality USB ports
Immediate availability of scans on a takeaway device, virtually paper-free
True standalone solution
The 7.2 inch touchscreen provides access to all functions
directly from the scanner. It is very easy to access and is
operator-friendly because it is located right at the center of
the scanner, where the operator is.
PC and touchscreen inside, no hidden cost
True stand alone solution
Fast Gigabit network connection
Ultra high resolution 210 mega pixel camera with no Bayer patte
Smallest footprint on the market
Long life LED illumination
Sturdy industrial housing
Compact, ergonomic design suitable for
even the smallest office environment
Audio output makes the scanner easy to use
and troubleshoot in case an error situation arises. This
makes the scanner intuitive and easy to operate.
The audio cues are available in multiple languages, offered
in the Scan2Net® interface in your browser or on the
touchscreen. In addition, there are non-speech audio cues
to confirm various touchscreen selections. The Scan2Net® technology is the basic for controlling S2N-devices. All parameters are available in a clearly structured man-machine interface. Minimized scan time combined with multi-purpose data output increases the efficiency of document scanning. All Image Access scanners with a touch screen support the function Scan2VGA. With this option, a VGA monitor can be directly connected to the scanner. The scanned image is displayed on the VGA monitor - a fully standalone solution without the need for a client PC. Image Access scanners are a truly green
scanners. The power supply is CEC level V compliant, the
lowest power consumption level and highest efficiency level
existing today.
Its power consumption in sleep mode is only 0.5W, ten
times less than its predecessor. During scanning, the power
consumption varies but is always less than 90W. The
Power consumption is only approximately
50% of the specification of its predecessor.
WideTEK® 36MFS -- smallest single footprint MFP on the market
The WideTEK® 36MFS solution offers the smallest single footprint MFP system on the market. Using only a WideTEK® 36 wide format color CCD scanner and floorstand with the Scan2iPF software option, the WideTEK® 36MFS enables operators to continue scanning while the printer is still printing - and WideTEK® 36´s fast scanning speeds are a good match for the Canon imagePROGRAF series printer output speeds. Why buy a fast printer if you have to wait for the scanner to finish?
Operator adjustable scanner positioning
A better ergonomical design makes the WideTEK® 36MFS the favorite of MFP operators. The operator-adjustable positioning of the scanner means that operators do not have to lean in to feed the scanner; they work from a comfortable standing position. The total footprint is approximately 60 x 30 inches with a 48 inch high scan table, lightweight and easy to move.
Canon iPF series printers are sold separately through an authorized dealer.
